The driver scans the charger. Not a sticker.
A dynamic UPI EV charger puts a display on the unit that shows a UPI QR code for the session in front of it. The driver scans it with any UPI app, pays, and charging starts on confirmation. No app to download, no account to open and no RFID card to issue.
Because the code belongs to that session rather than being a fixed sticker on the wall, the payment and the charging session are tied together: the host is credited within two days, and a session that fails to deliver is refunded to the driver. RIOD manufactures the range in Kerala. Prices start at ₹12,000, inclusive of GST.
Static QR versus dynamic UPI.
Most “UPI charging” in the market is a printed sticker next to a dumb socket. It takes money. It does not run a charging business.
| Static QR sticker | Dynamic UPI on the charger | |
|---|---|---|
| Where the code lives | Printed once, stuck to the wall | Rendered on the unit's display for that session |
| The amount | The driver types it in, and can type anything | Belongs to the session being paid for |
| Starting the session | Someone has to switch the socket on | Starts automatically once payment is confirmed |
| If charging fails | The driver chases the owner for a refund | The driver is refunded |
| Reconciliation | Manual, and guesswork at any volume | Session records and payments line up on their own |
| Energy measurement | None | Class 1 internal meter, MID external meter supported |
| Multiple bays on one supply | Trips the incomer | Dynamic load management over Modbus |
Four steps, no staff.
The driver scans
The display shows a UPI QR code. Any UPI app works, so there is nothing to install and no account to create.
The session starts on payment
Charging begins once the payment is confirmed. Nobody has to be on site to switch anything on.
Energy is measured
A Class 1 meter inside the unit records the session. An MID certified external meter is supported where billing grade measurement is required.
The host is paid
Session earnings are credited to the host within two days. A session that does not deliver is refunded to the driver.
Three dynamic UPI chargers.
Same payment behaviour across all three. Pick on supply and speed. Prices are live from the RIOD store and include GST.
| Charger | Price | |
|---|---|---|
Lora UPI EV 3.3 kW Two- and three-wheelers, and an overnight car charge. The cheapest way to turn one socket into a paid bay. Single-phase · 3 pin output | ₹12,000 | View |
Lora UPI EV 7.4 kW Shops, cafes, hotels, offices and apartment visitor bays. Adds roughly 40 to 45 km of range an hour. Single-phase · Type 2, 5 m tethered cable | ₹22,500 | View |
Lora UPI EV 11/22 kW Public parking, retail and highway stops. Output is set to 11 or 22 kW at commissioning to match the sanctioned supply. Three-phase · Type 2, 5 m tethered cable | ₹27,000 | View |
Each model costs ₹3,000 more than the equivalent standard Lora charger. The specification is otherwise identical; the difference is the display that lets a driver pay at the unit. Compare against the rest of the range on the EV charger price page.
What is inside every unit.
Sites that earn from a parking spot.
Anywhere a bay should be paid for but nobody wants to run a membership scheme.
Shops, cafes and restaurants
Turn a parking spot into a paid bay, with nothing to administer and no cards to issue.
EV charging for retailApartments and housing societies
Paid visitor and resident bays shared across the block, with load balancing so the sanctioned supply holds.
EV charging for apartmentsOffices and business parks
Employee and visitor charging, billed per session, without issuing an RFID card to every person on site.
EV charging for workplacesHotels and resorts
Guests pay at the charger rather than through the front desk, so a bay earns overnight without staff involvement.
EV charging for hotelsPublic and paid parking
Three-phase bays at 11 or 22 kW where turnover matters and the driver is a stranger every time.
EV charging for parkingCharge point operators
Any OCPP 1.6 platform, ours or a third party's. UPI widens the paying audience to everyone with a phone.
UPI payment integrationOne thing to plan for.
Charging keeps running when the connection drops: community mode holds the session up, which is what makes a basement viable. Taking a UPI payment is different. A payment has to reach the bank, so the charger needs coverage at the point where it is mounted.
On a basement site, check signal at the wall before the install, not at the entrance. Where there is none, the answer is usually a small antenna or an access point on the level, and it is cheaper to plan it in than to retrofit it.
Dynamic UPI charging, answered.
What is a dynamic UPI EV charger?
+
It is an EV charger that generates a UPI QR code on its own display for the session in front of it, rather than carrying a fixed printed sticker. The driver scans the code shown on the charger, pays from any UPI app, and charging starts once that payment is confirmed. Because the code belongs to that session, the payment and the charging session are tied together, so the host can be paid and a failed session can be refunded automatically.
How is dynamic UPI different from a static QR sticker?
+
A static sticker is the same code for every driver and every session. Someone has to type the amount, nothing connects the payment to the charger, and reconciling who paid for what is manual. A dynamic code is produced for that session on the charger's display, so the session starts on payment confirmation and the records line up on their own.
Does a driver need an app to pay?
+
No. The display shows a UPI QR code and any UPI app can pay it. There is no app to install, no account to open and no RFID card to collect. That is the whole point: every driver with a phone can already use the charger.
When does the site owner get the money?
+
Session earnings are credited to the host within two days.
What happens if a charging session fails?
+
The driver is refunded.
Does it work without an internet connection?
+
Charging does. Community mode keeps sessions running when the connection drops, which matters in basement parking. A connection is needed to take a UPI payment and to send session records and remote monitoring data, so a site that is meant to take payments needs coverage at the charger.
How much more does the UPI model cost?
+
₹3,000 more than the equivalent standard Lora charger. The specification is otherwise the same; the difference is the display that shows the UPI QR code, so a driver can pay at the unit itself.
Does it work with an OCPP platform we already run?
+
Yes. OCPP 1.6 over TLS, so it pairs with any OCPP 1.6 platform, ours or a third party's. Nothing is locked to a proprietary backend.
Can several chargers share one supply?
+
Yes. Dynamic load management over Modbus balances the load across units so the sanctioned supply is never exceeded. This is what lets a building add bays without upgrading its connection.
Can it be installed outdoors?
+
Yes. The enclosure is IP65 rated, and the range is in service in open parking as well as covered basements.
Who installs it?
+
Any licensed electrician can install it. RIOD also offers installation as a paid add-on, quoted per site, because the cost depends on cable run, supply and civil work.
Can RIOD add UPI to chargers we already own?
+
That is a different piece of work, and RIOD builds it: dynamic QR generation on your charger or CMS, UPI Autopay mandates, gateway integration and reconciliation. See UPI payment integration for how that is engineered.
Every driver already has your payment method.
Add UPI to your own chargers
Dynamic QR, Autopay and reconciliation, built to your spec.
UPI payment integration