Guides / Product Guide

Dual-Gun AC EV Chargers

The question to ask about any dual-gun unit is whether both connectors deliver full rate at the same time, or whether they share one power stage between them.

Both designs exist and both are legitimate, but they behave completely differently on a busy site, and the specification sheet does not always make it obvious which one you are buying.

Ask what is available

For Site owner, CPO, facility manager

01

Shared power or independent

In a shared design, one power stage serves two connectors. One vehicle gets the full rate; two vehicles divide it. In an independent design, each connector has its own capability and both can charge at full rate simultaneously, which requires proportionally more supply.

Shared designs are not inferior. On a supply-constrained site, dividing capacity between two bays is exactly the behaviour you want, and it is what load management does anyway. The problem is only when buyers expect independent behaviour and receive shared.

02

What a dual-gun unit actually saves

  • One mounting point, one foundation or wall fixing rather than two
  • One supply cable run rather than two
  • One set of civil works, which is frequently the largest saving
  • One unit to commission, connect and manage
  • Less physical footprint in constrained parking

On sites where trenching dominates the budget, serving two bays from one point can be materially cheaper than two separate installations.

03

What it costs you

Coupling. A fault that takes the unit out of service takes both bays with it, where two separate units would have lost one. On a two-bay site that is the whole installation, and it is worth weighing against the civil saving.

Cable reach also constrains bay layout, since both connectors must reach their vehicles from a single position.

04

Questions to ask a supplier

  • Do both connectors deliver full rate simultaneously, or is power shared?
  • If shared, how is it allocated when a second vehicle connects mid-session?
  • Is each connector separately metered, and separately billable?
  • Does a fault on one connector disable the other?
  • What is the cable length, and does it reach both bays as laid out?

The metering question matters commercially. Two bays sharing one meter cannot be billed to two drivers accurately.

05

Our position

What follows describes the decision rather than a RIOD product. Dual-gun configuration is not among the platform variants confirmed for publication, so nothing here should be read as a product claim. Ask us directly what is available.

06

What RIOD ships

Dual gun is available on the AC range, in wall mount and pedestal forms, so the same arrangement suits a basement wall and an open forecourt.

Swipe to compare

Dual gun AC configurations currently shipping.
What it means
Configurations7.4 kW x 2 and 22 kW x 2
MountingWall mount or pedestal
PowerEach connector is independently powered
MeteringSeparate metering per connector
AuthenticationSeparate authentication per connector

Independent power, metering and authentication per connector is the distinction that matters. A dual unit that shares one supply path between two connectors halves the rate when both are in use and cannot bill them apart. These do neither.

Want this applied to your own site?

Ask what is available

Technically reviewed by Anees P K, Director of Technology. Last reviewed 2026-08-29.

Frequently asked questions

Does a dual-gun charger charge two cars at full speed?

Only if it has independent power stages. Many share one stage between connectors, so one vehicle gets full rate and two divide it. Ask this specifically.

Is shared power a problem?

Not inherently. On a supply-constrained site, dividing capacity is the behaviour you want. The problem is expecting independent behaviour and receiving shared.

What does a dual-gun unit save?

One mounting point, one cable run and one set of civil works. On sites where trenching dominates the budget, that can be a material saving.

What is the downside?

Coupling. A fault takes both bays out where two separate units would have lost one. On a two-bay site that is the whole installation.

Does RIOD offer a dual-gun unit?

What is above describes the decision rather than a product. Dual-gun is not among the confirmed platform variants, so ask us directly rather than reading a claim into this page.

Ask what is available

Tell us the bay layout and supply position and we will tell you what configuration fits, and what we can supply.

Ask what is available